ultimate big valve head
 

this is a real big valve head, if you want performance, this is where its at :clap:

Looks pretty nice. :tup:

Isn't this red paint INSIDE the head dangerous? Paint in the engine oil can seize an engine, hot paint is like glue. Never seen an engine part painted ON THE INSIDE (why?). The red paint on the springs, for example, will fall off immediately and will get caught in the return oil and may block the oil passages of the piston or stick inside a bearing, or go just about anywhere where oil goes.

Racers do it. Makes the surface slicker allowing the oil to drain back at a more accelerated rate. The valley in my race cars engine is done the same way.

it's not PAINT it's glyptal....and the springs are ceramic coated...

Want want want... to bad I'm broke

This is a head i already had, got it redone, but you can get one just like this at scrappys they are hand crafted

http://www.eastwood.com/glyptal-red-brush-on-1-qt.html read this

thats were i get mine from................all experience engine builders like my self use it.it works very well......its NOT your every day paint if that is what you are thinking...

It looks like its rated for 250 degrees. I'm no expert but don't air cooled motors run nearly 300 degrees? No one has issues so I guess it works but looks like it is probably intended for use in liquid cooled vehicles...

300!!!!!!!!wow you better start worrying at 200.........

I guess your right sure seem hotter than that when you touch the suckers...

Is that red scoot a tao tao 50cc?reason I'm asking is I want to get the same type but in two stroke.roketa has one and another has one called a jon jon.I can't get the after market people to help me out for a performance two stroke pipi for this model.it has a gy6 motor but they need the frame for bracket fitment

The red scoot is a 50cc roketa bahama 4 stroke