ScootDawg Forums

ScootDawg Forums (http://www.scootdawg.net/index.php)
-   50cc - 124cc (http://www.scootdawg.net/forumdisplay.php?f=24)
-   -   auto enrichener (http://www.scootdawg.net/showthread.php?t=54438)

dwint51 07-17-2014 01:10 PM

auto enrichener
 
I replaced my enrichener and still no high idle at start up.would this be electrical problem?

dwint51 07-17-2014 01:10 PM

Quote:

Originally Posted by dwint51 (Post 528419)
I replaced my enrichener and still no high idle at start up.would this be electrical problem?

for some reason it is faster now

chopyouup 07-17-2014 01:47 PM

Quote:

Originally Posted by dwint51 (Post 528420)
for some reason it is faster now

No sounds like an air fuel mixture problem or a jet issue.

dwint51 07-17-2014 02:49 PM

I cleaned the carb.i have a good tan plug and its running better than ever.i just went up a hill at 22 and usually 15.i don't get it but it needs to be fixed before the cold weather comes

chopyouup 07-17-2014 06:10 PM

Quote:

Originally Posted by dwint51 (Post 528423)
I cleaned the carb.i have a good tan plug and its running better than ever.i just went up a hill at 22 and usually 15.i don't get it but it needs to be fixed before the cold weather comes

Most people wouldn't be complaining! But OK if I get what your saying you yhijkvthe scooter is over working itself, the way this happens is usually running to lean (to much air) take a look at your spark plug if its whiteish (as opposed to gray to brown or charcoal) you may be running lean.

dwint51 07-17-2014 07:25 PM

looks tan to me.where do the wires go that the enrichener plugs into?is it a 12 volt hot wire.when I first start it it smokes then stops when warm.that would make me think its working

chopyouup 07-17-2014 07:56 PM

Quote:

Originally Posted by dwint51 (Post 528429)
looks tan to me.where do the wires go that the enrichener plugs into?is it a 12 volt hot wire.when I first start it it smokes then stops when warm.that would make me think its working

You can try unplugging the enricher. I really don't know where it goes, I assumed it goes to the CDI though. There are a few wiring diagrams for gy6 online (do a google search).

I still don't get what exactly your issue is though.

dwint51 07-17-2014 08:11 PM

I guess I don't have any issues except I hate when things don't work the way they are suppose to

Bvance554 07-18-2014 12:47 AM

What are you wanting it to do?

dwint51 07-18-2014 01:47 PM

give a high idle till its warm so I don't have to hold the throttle.i paid for a new one I expect it to work

Bvance554 07-20-2014 11:57 PM

Have you tried turning in the screw attached to the throttle cable a little? the one that the linkage rests against and holds the idle?

dwint51 07-21-2014 06:02 AM

ill try it a little more


All times are GMT -4. The time now is 07:19 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.