performance variator
 

any one buy it from scrappydawgs for there minerreli engines?they come in 4 and 5 gram sliders but I don't no what they come stock.i have a jonway 2t but cant download a manual

weights have a much bigger effect on 2t scooters, buy both or get a few sizes, after my upgrades mine needed 8g to run fast and it took me a while to figure it out since i mostly use 5g for modified 4t 50s, 4g is a little light if those are the 2 to choose from get the 5s

I would think if two scooters have the same minerelli engines but weigh different they would have different weights.it only makes sence that they would put a lighter weight on a heavier scooter so your acceleration would be good.its hard to believe no one on this site can give me information on what a jonway 2t has for weghts.i know I can buy a scale but choose not to

8 or 9g weights are stock on the 1p40, regardless of bike size.

I found 5g to be the best for my E-Ton. My 139qmb bikes like 6g, and my kymco Yup 50 2t likes a mixture of 4 and 5g weights.

I run strictly sliders as they grant you more low and mid-range acceleration.

I weighed mine and they are 5gr so I will but some 5 gr sliders and see if I see a difference if not ill try the 4 gr or mix the 4s and 5s.i weigh 185 so I think alittle lower on the weight will help my take off