ScootDawg Forums

ScootDawg Forums (http://www.scootdawg.net/index.php)
-   125cc - 249cc (http://www.scootdawg.net/forumdisplay.php?f=25)
-   -   Larger wheel upgrade??? (http://www.scootdawg.net/showthread.php?t=54414)

monroe 07-10-2014 12:10 AM

Larger wheel upgrade???
 
:scoot:
Hello everyone, got a question for the awesome people on this forum... I have a 2010 znen flyscooter il bello 150cc with a 10" wheel on the front and back. Can a 12" wheel fit on the front while using the stock OEM parts that are on the scooter now like the disc brake rotor, caliper, speedometer, and plastic stock front fender.

Madathlon 07-10-2014 09:06 AM

For an 12 inch wheel you need a long case engine assy. (Assuming you have an GY6 Clone)

monroe 07-10-2014 11:17 AM

hello Im just looking to put a 12" wheel on the front not the back.. and yes it is a gy6 150cc clone

Gimpdog 07-10-2014 11:21 AM

Would the tire even fit through the forks and fender?? Most of the forks w/ fenders I've seen are pretty narrow...

monroe 07-10-2014 11:28 AM

i have a 10" x 3.50 on the scooter now and ive found 12" x 3.50 online and my scooter looks like it has enough space under the front fender but i dont know about using the stock parts off the 10" wheel and putting them on the 12" if that affects the performance

dwint51 07-20-2014 08:48 PM

less acceleration better top end =less rpms

Madathlon 07-21-2014 10:17 AM

OKay, for the front end you need to have at least two inched of room currently from the top of your tire to the lowest point of the fender. if you do then you should be able to fit a 12 inch tire. But the question is way? It won't improve handling or milage and may screw up your speedo readings. Plus you have to change the front brake caliber and bracket.


All times are GMT -4. The time now is 07:37 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.