leo vince zx-r
 

I saw on you tube t;hat these pipes have two restricters on them.I want a pipe in the $200.00 range

For a 2T, I use
http://www.provoscooter.com/scooters...minarelli.html
Wonderful performance pipe

Most all pipes, aftermarket have the cone in the flange that needs to be removed the leo is a good all around pipe but the stage6 pro replica http://scootertuning.ca/en/exhaust-s...cpi-vento.html it will fit (all pipe dont line exactly up)makes the best power and wins most pipe shootouts. I also have the rs2 and think it is a good pipe

That stage 6is a good looking pipe and the price is good.it says you suffer some low end but I guess I'll have to figure out how to getht back

that is on any expansion pipe but a well tune cvt you will never know

I don't no what carb I have but I should get a uni filter and bigger mains

You do need to up jet for the pipe and if you go uni you definitely need to, i have open air filter on mine cause they are cheaper then a new air box but they are 2-3 times louder than the stock box and if you run the stock carb might as will use the stock airbox, i have never been able to tell any difference between the to power wise but i do like to pop out the snorkel on the stock box to allow a little better flow does your carb look like this http://i1111.photobucket.com/albums/...4_none_400.jpg

I think it is.it has japan and yab.p001-02 of01 2 onthe side

I called pro power ride outlet and they don't even no.every dirt bike I've owed had mikuni or keighn.this only says japan so it must be some crappy one.doesn't anyone here have a jonway that could help me?

what you wanna know i have all kinds of scoot brands

also with the stage 6 pipe expect to upjet with it.

also i have a brand new leo vince zx im willing to sell