ScootDawg Forums

ScootDawg Forums (http://www.scootdawg.net/index.php)
-   Custom Builds (http://www.scootdawg.net/forumdisplay.php?f=29)
-   -   My Red Streak 95 cc bbk scoot "Spectre" (http://www.scootdawg.net/showthread.php?t=52763)

inuyasha 02-09-2013 06:28 PM

My Red Streak 95 cc bbk scoot "Spectre"
 
Hi
Heres "Spectre" Named after the gunship
http://www.spectre-association.org/
Hoca 44 mm stroker crank,NYC A9 performance cam, Dr pulley clutch , variator and 8.5 gram sliders 1,500 rpm clutch and torque springs . racing cdi, gears are 17/49 with a NYC 85 cc bbk and 50 mm head ported polished and milled to raise compression. With an Dellorto 20 mm carburator with 88 main jet and an after market exhaust.
http://farm9.staticflickr.com/8181/7...7f1ff1c7_c.jpg
Project scoot 042 by inuyasha50, on Flickr
http://farm9.staticflickr.com/8442/7...eb1ee9ef_c.jpg
Project scoot 044 by inuyasha50, on Flickr
http://farm9.staticflickr.com/8176/7...e7f67b2f_c.jpg
Project scoot 046 by inuyasha50, on Flickr
http://www.youtube.com/watch?v=RPdIuSdGO30
She has excellent off the line acceleration and a top speed of 54 to 55 mph at 8,500 RPM's
A short ride around town
http://www.youtube.com/watch?v=kU2eoRxkN6c
Take care and ride safely
Yours Hank

millsc 02-09-2013 07:24 PM

nice, i played around with weights today i got great top end with 9 gram weights at 8200 rpms, but put the 9.5 back to stay under 8000 rpms anything over 7500 rpms worries me.

inuyasha 02-09-2013 07:27 PM

Quote:

Originally Posted by millsc (Post 516437)
nice, i played around with weights today i got great top end with 9 gram weights at 8200 rpms, but put the 9.5 back to stay under 8000 rpms anything over 7500 rpms worries me.

Hi
Thanks
How about starting a thread or 2 on your BBK scoots
I would really like to see them and find out more
Take care and ride safely dear friend
Yours Hank

millsc 02-09-2013 07:44 PM

may put the 9 grams in this week and film a gps run, I get the fear of it exploding after it hits 8k rpms and its a little scary once you hit 50 on the 10inch wheels.

scootnwinn 02-10-2013 11:51 AM

Do the handlebars shake and such at 50 millsc?

Nice scoot Hank

millsc 02-10-2013 12:18 PM

No it actually stays pretty stable, i'm just afraid if i hit a bump or hole in the road id go down and be badly hurt and the scoot destroyed, its seems like your going really fast since the scoot is so small, i did runs yesterday with my phone gps and hit 54 mph on flat and then hit a downhill and went over 60, it makes you scream holy sh*t! Its a rush, but scary at the same time.

inuyasha 02-10-2013 01:13 PM

Quote:

Originally Posted by millsc (Post 516441)
may put the 9 grams in this week and film a gps run, I get the fear of it exploding after it hits 8k rpms and its a little scary once you hit 50 on the 10inch wheels.

Hi
The redstreak has 12 inch wheels and tires, make for a smooth stable ride and though my Puma had only 10's she still had a very steady and smooth ride as well
Take care and ride safely dear friend
Yours Hank

prodigit 02-25-2013 11:02 PM

I'd have to say that at 50MPH my ATM-50 runs just the same as on lower speeds.
it's easier to pull the handlebars left or right than with larger wheels, but nothing like scary flips ever happened to me. If anything it's very nimble.

I do have 3.5x10 tires, and may feel scared too if it had any thinner tires. But at 3.5 they're just about as thick as many larger sized scooters.

50cc 05-10-2013 01:03 AM

Hi Hank, isn't it a bit lean with a #88 main jet?

inuyasha 05-10-2013 02:37 AM

Quote:

Originally Posted by 50cc (Post 520501)
Hi Hank, isn't it a bit lean with a #88 main jet?

Hi
I did open up the 88 a bit with a drill bit so its alittle larger then a stock 88
Shes running slightly on the lean side, but the plug chops are good a light tan color like caramel
And the performance is excellent
Take care and ride safely dear friend
Yours Hank

buford1488 05-10-2013 06:40 AM

millsc you still useing the performance head?? like to see ya on flat hitting @ least 55 mph....nice!!!!!!!


All times are GMT -4. The time now is 04:51 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.