clutch changing problems
 

Ok what size socket do I need to remove that giant ass nut on the clutch? The one you have to remove to change torque spring??

46mm nut i took mine to a muffler shop he let me use his tools free.

Is that the same size for 250cc clutch?

I believe they all use the 46mm or 1 13/16 socket

impact wrench takes it right off i put my feet on it when i did it, and clamped it to a bench and impacted it back on its simple with the right tools.

Ok, Thanks

46mm seems kinda big. Is that really the size for the 50cc?

yes its the size been there done this

I did see on one forum, working on a 50cc they were using a 38mm. measure it and see.

My 250cc clutch takes a 1 5/8" socket.

Mine was 38mm. I use a 1 1/2 socket on my air impact.

38mm = 1.49 inches.

I have a 08 Keeway F-Act

I was wrong measured again its 38mm or 1 1/2 my bad

Thanks millsc. I thought it sounded big