ScootDawg Forums

ScootDawg Forums (http://www.scootdawg.net/index.php)
-   50cc - 124cc (http://www.scootdawg.net/forumdisplay.php?f=24)
-   -   Clutch install 1500 rpm spring (http://www.scootdawg.net/showthread.php?t=55582)

linkkokiri83 09-15-2016 05:52 PM

Clutch install 1500 rpm spring
 
How would i get this thing on. Stock spring, i cam squeeze easily amd get the belt down. With this spring i cant. Ideas?

wheelbender6 09-15-2016 10:22 PM

I have a new torque spring to install too. I haven't tried yet.

stitch_man87 09-16-2016 01:46 PM

take off the variator pulley. I'm a small dude, but the clutch shouldn't be that hard to compress with two hands, i do it all the time. Try it hands at 9 and 3 and have someone push the belt in between the pulley

linkkokiri83 09-17-2016 06:48 PM

I got it, easy solution. I put the belt into the plates before i put the clutch back together. Taped the belt together so it was around halfway down the plates, put the clutch on its rod. Assembled variator,and the the clutch. I also made a compression tool with a couple long bolts amd 2 boards with hole in top to let a socket tighten the nut. I wannna post a picture of it. It worked very well and cheap amd easy to make.


All times are GMT -4. The time now is 07:24 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.