TaoTao ATM50-A1 Switch Wiring issues

[wayho]

My son purchased a used ATM50-A1. After dropping it, it no longer would start.
Removed the plastic to find loose switch wires. They were just hanging where they had previously just been twisted together.
Now here's my problem:
The key switch has 5 wires: Green, Green, Black, Red, & Black/White
There are only 4 loose wires from the wiring harness: Green, Red, Black, and Black/Blue.
Which ones connect where?
Any help would be GREATLY appreciated!!!

[bull]

Greens are always ground circuits on chinese scooters.

the red, should be power from the battery to the switch, then switched power to the scooter is typically black.

black with a tracer is most likely the shut down circuit from the cdi which goes to ground when the switch is cycled off.

if you need more help, look in the 250cc section. I placed a wiring diagram link there in a roketa resurrecting thread