front brake switch

[dwint51]

there are two wires coming from the front brake switch.are those for the brake light or prevents it from starting unless you pull in the brake.reason im asking mine had a melt down on a few wires and they are no longer there and it starts now without pulling in the brake handle.

[tcthomp66]

That should be the rear brake for the safety interlock on the ignition... double check all the wiring. You may want to look (worst case scenario) at a complete wiring harness, unless someone else here can come up with an alternative.

[dwint51]

mine always started with either one.im having some serious shorting problems but I don't see any more bare wires.the wiring on these Chinese scooters suck.they were all loose then fixed them.