PDA

View Full Version : head lights,dash lights,tail lights


Phil
09-11-2014, 01:35 AM
charging system went bad. before I replaced battery and stator the lights were ok, dim but ok. After changing stator and buying and charging up the new battery, no dash, tail or headlights. High beams work, but not head lights. 99% sure i hooked everything back up the way it should be. 150cc jmstar/jonway. any help is much appreciated

blueboy5000
09-13-2014, 08:26 AM
You should have three wires attached to the battery:

-Small red wire w fuse connected to "+"

-Large red wire connected to "+"

-Black wire connected to "-"

On the small red wire, make sure the fuse is good and properly connected.

Phil
09-13-2014, 07:34 PM
thanks blueboy! i will check on that

Phil
09-15-2014, 01:11 PM
checked fuse and all seems to appear good. any other ideas?

blueboy5000
09-16-2014, 07:38 AM
Next, check all GROUND wires, which will be green or black and attached to the FRAME. Make sure they are all connected and secure.