PDA

View Full Version : Scoot Questions


Raybeez8
06-19-2013, 11:47 PM
I have just purchased a used 2008 Jonway, or so I was told it was, 150cc, It has had some major upgrades. Big bore kit, larger carb, performance exhaust, upgraded variator springs, and a oil cooler. Its fast, really fast to be exact. But it has an oil leak. I was wondering what weight of oil I should be using and how much.

inuyasha
06-20-2013, 01:30 AM
Hi
Welcome aboard
Pleased to meet you
Since you just got her i would give her a full pdi, you will get to know about your scoot and her needs and give her a wonderful start on a good long life
I gave a pdi to any scoot i may get whether new or used it makes no difference
http://x1scooters.com/pdi.html
Take care and ride safely
Yours Hank

Raybeez8
06-20-2013, 01:15 PM
I am giving her the once over. I traced te oil leak back t something next to the carb. Is held in with 2 bolts and has a hole in the center. Looking over the engine diagram to see what it is. Turns out I was missing a screw. Ran up to Gomoto in minneapolis and got a new one.

DW
06-20-2013, 03:45 PM
22oz of 15w40 is what I use. Usually sold by the gallon for diesel engines.

Guest_3
06-21-2013, 09:29 AM
Usually sold by the gallon for diesel engines. Being a ex truck driver, I run Rotella T 15w-40w in everything I own. :tup: . http://ts1.mm.bing.net/th?id=H.4684762385024216&pid=1.7&w=133&h=175&c=7&rs=1