PDA

View Full Version : Question: How to fix problem:


richardthescooter1
05-29-2013, 03:02 PM
Here is pic of what my carb looks like, notice the part of carb that would connect to air box, my problem is that I don't have much there for the clamp to hold on to. Any of you Dawgs have any ideas? I'm lucky if I have hsalf the clamp holding the hose on here.

lykos23
05-29-2013, 04:36 PM
I had no idea this was a problem... :S I have the same thing going on where if I tighten my filter on too tight it will just come right off, and as it is all it would take is a good bumb or small yank for it to come loose. I thought that's just how the carbs came.

richardthescooter1
05-29-2013, 04:50 PM
It is a poor set up, when mine is starting cut out (yep air box clamp coming loose) I just think there must be a salution to this problem.

Guest_3
05-29-2013, 06:30 PM
Use a wire hose clamp like this one and hold the 2 wires together when you tighten it.. :tup:

http://store.workshopsupply.com/catalogue/images/13018.jpg

richardthescooter1
05-29-2013, 08:16 PM
Hey thanks scooterwayne,