new to the scooter world

[dwint51]

Saying hey from n.c . I'm buying a roketa next week mcr-07t-50 two stroke.here a lot of horror stories about these but I like fixing things.might need some help from you people on parts.hope everyone had a good easter

[scootnwinn]

Welcome to the forum, there is lots of help here when you need it...

[Admin]

Welcome to the forum. :)

[Guest_3]

Welcome to ScootDawg. :)

[dwint51]

Thanks everyone

[techie610]

Welcome to the Forum, dwint. :D
Where at in NC are you?
And if you ever want some help or advice, you can just turn to the Dawgs. :D

[dwint51]

Thanks,I'm from murphy n.c.all the way over on the west side.tenn is a few miles one way and g.a is the other way.lol .looks like you have a 50cc two stroke tweaked pretty good.maybe you can help me out.my licence got screwed up some how and I'm lucky I can ride a fifty cc legally in n.c.I'm buying a two stroke next week and was wondering if the bbk kits have ccs stamped on the head or cylinder? If I don't go that route I'm goning to need to get as much power out of this without going to crazy.there's a lot of hills here so I was thinking maybe a pedmoto series 1 pipe.stronger clutch springs and change out the variator weights.I've been trying to learn what I need but I own harley choppers and this is all new to me.I'm 175#the scoot is 185 if that helps any.if you could steer me in the right direction you would help me out alot

[inuyasha]

Hi
Welcome aboard
Pleased to meet you
2Ts are the way to go if you want great performance so your off to a wonderful start
My Aprilia SR 50 has a top speed of 63 mph
The tips on these pages should help you achieve your goals
http://www.provoscooter.com/tuning
http://www.scootnfast.com/
Taker care and ride safely
Yours Hank

[dwint51]

Some people say the model roketa mcr-07t-50 two stroke is minarelli some say gy6.I'm new to this and don't no the differance in the cases

[inuyasha]

Some people say the model roketa mcr-07t-50 two stroke is minarelli some say gy6.I'm new to this and don't no the differance in the cases
Hi
GY6 clones are all 4 stroke so if its a chinese 2 stroke most likely its a minarelli clone
http://en.wikipedia.org/wiki/GY6_engine
http://en.wikipedia.org/wiki/Minarelli
Some more relevent info
http://motorscooterguide.net/Articles/2StrokeOR4Stroke/2StrokeOR4Stroke.html
Take care and ride safely
Yours Hank

[dwint51]

Thanks for clearing that fot me.salesman don't even no what there selling

[richardthescooter1]

Welcome to the forum dwint51, glad to meet you.

[dwint51]

Thank you.I've had a lot of help with some questions already.

[techie610]

Most of the BBK jugs and heads dont say straight up, they just say something like
'QMJ80CF' (At least the ones Ive done) But you would have to look really hard to find that, and if the bike is put together, nobody is going to see it.
I know people that are passing a 150 GY6 off, on a small bike, as a 50cc. lol

2T are great for the hills and curves, just dont expect to ride for more than a couple hours, cause it will over heat and seize.

I live in Yancey County, which is on the TN line, about 30 minutes from Asheville.
The Blue Ridge PRK WY is just about my back yard. lol
I rode my 2T there for about 90 min, and it got pretty rough.

[dwint51]

Ok thanks.