PDA

View Full Version : Stuff you don't need thread


scootnwinn
03-01-2013, 05:02 PM
Ok in the spirit of community. On a cycling forum I am on there is a thread were people give away stuff they don't need. That's right just give it away. For me it's a way to say I appreciate scootdawg and its members. So to be clear post stuff here you have laying around for your scoot that you just don't need at all that maybe someone else could use.


I have a set of 12 gram Dr. Pulley slider weights for a standard GY6 150, I want to give away for free. I got them for the Jonway and sold it before I installed them so they are brand spanking new. I will pay for the mailing too. (that's right they will go in the mail as slow as it goes.) If you want them fast you can send some dough I will overnight them if you like.

No sellers here only those looking to pay it forward. I think its ok if you ask the receiver to pay the shipping but I'm not.

First pm or reply gets them.

Ready set .... go! :D


Anyone else got stuff laying around they will never use??

Edeited title for clarity

scootnwinn
03-01-2013, 05:04 PM
BTW please don't take them if you won't install them right away...

Admin
03-01-2013, 05:05 PM
Great idea for a thread! I've seen this on other forums as well, and it works well.

:tup:

scootnwinn
03-01-2013, 05:06 PM
Glad you like it. It seemed good to me too makes for good karma all around

MEAN_MOTOFINO
03-01-2013, 08:06 PM
Cool thread man!

scootnwinn
03-03-2013, 01:07 PM
No takers eh??

mwlehman
03-05-2013, 08:41 PM
i have 2 stock cams, 2 stock cylinders with pistons(about 200 miles each) if anyone wants them for shipping cost

prodigit
03-05-2013, 09:45 PM
I have a blue CDI, 5 pin
http://i00.i.aliimg.com/wsphoto/v0/624598860/high-performance-Racing-CDI-type-2-for-JOG-50CC-scooter-moped-atv-free-shipping.jpg

(didn't fit my ATM50, which has the 4 + 2 pin setup, like below):
http://www.chinamotoparts.net/images/l/201211/13536571680.jpg

Giving away for free is not an issue, just that, not really willing to pay excessive shipping fees.

Any suggestions? USPS, with no tracking?

millsc
03-05-2013, 09:49 PM
I have a bunch of round rollers that came out of big bore kits i think they are all 8 grams

prodigit
03-05-2013, 09:55 PM
test sig

scootnwinn
03-05-2013, 09:59 PM
digit did you just use the get stuff free stuff as a testing platform?

its working btw

epyon96r
03-07-2013, 03:37 PM
Ill take the rollers, pm me plz, I. Was trying to drill out my rollers to make em light but. It got hot and melted the rubber, :( also I will post a pic soon of stuff I got laying around

epyon96r
03-20-2013, 12:49 PM
so I haven't had time to take any pics, but I do have an extra voltmeter up for grabs. It can help ya troubleshoot electrical issues on your scoot if they should arise. its nothing special, (harbor freight, $3-$7, or sometimes free with coupon). pm me if interested

techie610
04-18-2013, 04:48 PM
Was just replying to 'renew' the thread.
I have quite a bit of things, from 50cc to 178cc, wieghts and wires to RRs and springs.
If you come across something you want/need, ask here before you pay for it. It could save you some of that rare stuff called money. lol

teddy554
04-18-2013, 07:10 PM
Was just replying to 'renew' the thread.
I have quite a bit of things, from 50cc to 178cc, wieghts and wires to RRs and springs.
If you come across something you want/need, ask here before you pay for it. It could save you some of that rare stuff called money. lol

12x2.5 in gy6 50cc rear rim

techie610
04-19-2013, 12:52 PM
12x2.5 in gy6 50cc rear rim

I believe I have a brand new one.
I get off work at 1900, and I will go straight home and look for it.
Disk or Drum brake?

teddy554
04-19-2013, 04:37 PM
I believe I have a brand new one.
I get off work at 1900, and I will go straight home and look for it.
Disk or Drum brake?

Drum

techie610
04-21-2013, 12:36 AM
Sorry for the delay in post.
I found a 10 inch rim, tire must've froze. has a split in it.
If you want the rim, I can send it.

teddy554
04-21-2013, 07:33 AM
Sorry for the delay in post.
I found a 10 inch rim, tire must've froze. has a split in it.
If you want the rim, I can send it.
Thanks for looking but i need a 12 in rim

epyon96r
05-30-2013, 11:20 PM
so i seen some of yall have weights, i only destroyed one trying to modify it. its a 150cc if anyone has any please pm me
also a muffler, i ruined it too during modification

techie610
05-31-2013, 01:52 AM
so i seen some of yall have weights, i only destroyed one trying to modify it. its a 150cc if anyone has any please pm me
also a muffler, i ruined it too during modification

What gram weight? Roller or Slider?
Standard GY6 muffler?

Mad Scientist
05-31-2013, 03:22 AM
anyone have the nut that holds the clutch and torque spring assembly together? 50cc 139qmb

techie610
05-31-2013, 08:45 AM
Ill look for one

Mad Scientist
05-31-2013, 01:28 PM
let me know please!

epyon96r
06-03-2013, 09:38 PM
I think its a 12 gram roller, not slider, but honestly, i dont know. and yes a standard muffler, or anything that muffles, Im running open pipe and its starting to get to me.

Irish
06-05-2015, 12:23 PM
I wish that I knew about this site when I lived in N.H. I used to Drag Race (Street & legal ) a lot & I always used the idea that if it weighs something & you don't need it-get rid of it! You wouldn't believe some of the things that I threw away if none of my friends could use them! Most people here probably couldn't use them because they were mainly motorcycle parts.:shrug: Irish