clutch changing problems

[bloodymomo]

Ok what size socket do I need to remove that giant ass nut on the clutch? The one you have to remove to change torque spring??

[millsc]

46mm nut i took mine to a muffler shop he let me use his tools free.

[richardthescooter1]

Is that the same size for 250cc clutch?

[millsc]

I believe they all use the 46mm or 1 13/16 socket

[millsc]

impact wrench takes it right off i put my feet on it when i did it, and clamped it to a bench and impacted it back on its simple with the right tools.

[richardthescooter1]

I believe they all use the 46mm or 1 13/16 socket

Ok, Thanks

[bloodymomo]

46mm seems kinda big. Is that really the size for the 50cc?

[millsc]

yes its the size been there done this

[richardthescooter1]

I did see on one forum, working on a 50cc they were using a 38mm. measure it and see.

[spandi]

My 250cc clutch takes a 1 5/8" socket.

[aaron420e]

I did see on one forum, working on a 50cc they were using a 38mm. measure it and see.

Mine was 38mm. I use a 1 1/2 socket on my air impact.

38mm = 1.49 inches.

I have a 08 Keeway F-Act

[millsc]

I was wrong measured again its 38mm or 1 1/2 my bad

[bloodymomo]

Thanks millsc. I thought it sounded big