Tach Wiring Help

[MEAN_MOTOFINO]

I need some help getting this tach to work on my MOTOFiNO....

It came off a gy6 150 so I know itll work... I just dont know for sure what the wires goto. I know green is ground, black probably power and the white looking wire tach signal. But not 100% sure. :s

Any help would be awesome... :yay: Thanks :yay:

http://i269.photobucket.com/albums/jj59/01SVTSnakeBite/2013-01-31_16-51-45_611_zps2b7f6ae4.jpg

http://i269.photobucket.com/albums/jj59/01SVTSnakeBite/2013-01-31_16-52-42_122_zpsa13b59e3.jpg

[inuyasha]

Hi
Black is in most times the color of a ground wire
So i would think Black Ground white power and green signal or vice versa, i definitely think the black is a ground though
Take care and ride safely dear friend
Yours Hank

[MEAN_MOTOFINO]

Hank...these chinese scoots use green as the ground... or atleast the ones I have worked on...

Thanks for you input

Ride Safely My Dearest Friend
Yours MEAN MACHINE

[inuyasha]

Hank...these chinese scoots use green as the ground... or atleast the ones I have worked on...

Thanks for you input

Ride Safely My Dearest Friend
Yours MEAN MACHINE
Hi
Thats strange to me
On my 2006 Redstreak the tach and all the other ground wires are black
http://farm9.staticflickr.com/8035/7992735136_ca7cd0c4cb.jpg (http://www.flickr.com/photos/67070952@N06/7992735136/)
Project scoot 045 (http://www.flickr.com/photos/67070952@N06/7992735136/) by inuyasha50 (http://www.flickr.com/people/67070952@N06/), on Flickr
And also my Puma Used Black for the ground wires as well
http://farm7.staticflickr.com/6105/6363421833_00e01d1843.jpg (http://www.flickr.com/photos/67070952@N06/6363421833/)
Scooter Tag 017 (http://www.flickr.com/photos/67070952@N06/6363421833/) by inuyasha50 (http://www.flickr.com/people/67070952@N06/), on Flickr
Take care and ride safely dear friend
Yours Hank

[sharks06lly]

grounds are black and power is green on my tach LOL

[epyon96r]

I don't know about my ground color for my tach, but my 150 has a green ground for the ignition coil

[MEAN_MOTOFINO]

I got it working tonight. I had wired it like I said above and it.works good thanks scootdawgers.net

[prodigit]

on my motorcycle it's different. (for tiny tach: black= ground, red=+12V, Blue=dash light+12V, and green is signal)
Sometimes, if the tach has a back light it's easy to find the wire.
Usually the signal cable can get signal with 12V. so if you rapidly touch with the signal wire the +12V line, you may see the RPM's going up on the meter, and know it's the signal wire.

then there's the internet, and loads of good people that are generous enough to aid the common man with their illustrations and posts :-)

[MEAN_MOTOFINO]

That tach sounds like many that I have wired into cars before as well. But these chinese have to be complicated with their green grounds lol

Now to tune my cvt :clap: :s :clap: