PDA

View Full Version : Vento R4 build


teddy554
01-28-2013, 04:36 PM
Just wanted to start a build thread for my Vento R4
http://i1111.photobucket.com/albums/h479/teddyc554/phone%20pic/20130105_122822.jpg
So far i have bought a new 1e52qmf motor and a 100cc technigas next r pipe and a 21mm Naruku dell clone stage 6 roller 3-4.5grams and a motoforce stock style air box http://i1111.photobucket.com/albums/h479/teddyc554/20121130_075553.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20121228_120714.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20130123_190256.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20130123_212910.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20130123_214203.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20130128_135139.jpg
I have been try to get it tuned with the stock carb just couldn't get it to run right.The new carb is much better but it isn't a direct bolt in i have had issues with the stock throttle cable being to long and that is were i am at now.

inuyasha
01-28-2013, 05:31 PM
Hi Teddy
OOH RAH :tup:
Very nice shes gonna be a beast when your done :yay::clap: try not to set off any sonic booms:hehe:
Take care and ride safely dear friend
Yours Hank

Admin
01-28-2013, 05:40 PM
Very nice so far! Can't wait to see the finished project. :)

teddy554
01-28-2013, 06:22 PM
Thanks hank and admin it been a real pain with carb tuning stock and the naruku carb setup, to use the naruku had to make some mods to the cablefor it to fit and now waiting on a 90 degree tube http://www.ebay.com/itm/130786125974?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2648 to take up some slack before i can use it also the oil line is on the other side so i did to extend it or put a longer line on

teddy554
03-16-2013, 09:14 PM
Just got my order from Scootertuning.CA I order this intake because it had a oil feed nipple but there is no way my oil line is fitting on it
http://i1111.photobucket.com/albums/h479/teddyc554/20130227_175802.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20130227_175629.jpg

http://s1111.beta.photobucket.com/user/teddyc554/media/20130227_175930.jpg.html

Alright i finally had a whole day to work on this project.I have trouble tunning all day thought i was to rich then to lean, couldnt get it to go over 25 mph and make any power. Found two issues wasnt getting full travel from the custom setup with the naruku dell clone(forsale or trade) so i got rid of that setup and went back with the stock carb and free flow filter, much better but the motor was still lacking power, so i tired 100 main down to 85 never really change much speed and power wise but motor was much hotter when i got to the 85 main. So i pulled the head to see what that was like and was huge area probaly needs 2-3 mm shaved off, so i installed a 70cc head from a autotech kit.....man what a difference. Much more power and speed big difference settled on a 95 main and every thing seem to be prefect, i was spinning tires on wet pavement if i gave it to much gas but the 70cc head is much smaller on the outside compared to the 90cc head. here are some pictures. Also im have electrical issues that i will make a new thread for.
http://i1111.photobucket.com/albums/h479/teddyc554/20130316_152114.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20130316_152101.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20130316_152044.jpg

teddy554
03-18-2013, 02:57 PM
Alright i got rid of the naruku carbs was having to much trouble getting it setup on the stock throttle cable and the oil feed line was on the other side so has of now im back to the stock carb with a 95 main jet Well the scooter is running great as of right now, love the power it makes, just keeps pulling, next is to put in the stage 6 intake which i well do a review on
http://i1111.photobucket.com/albums/h479/teddyc554/20130318_121803.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20130318_121612.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/th_20130318_121849.jpg (http://i1111.photobucket.com/albums/h479/teddyc554/20130318_121849.mp4)

teddy554
03-18-2013, 03:00 PM
Also Another issue i have been having with this scooter is it keeps blowing bulbs and stator tried change the rectifier but i was told i may need to change the plug to get it to stop the electrical issue http://49ccscoot.proboards.com/thread/1795/chinese-1e40qmb-regulator-rectifier-wiring

teddy554
03-23-2013, 06:58 PM
Put a new stator in and my old rectifier and have all my lights back. It was a nice day today so i did a little in town cruising and wash the scoot
http://i1111.photobucket.com/albums/h479/teddyc554/20130323_164741.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20130323_164758-1.jpg

MEAN_MOTOFINO
03-23-2013, 09:23 PM
I like it ... Seems to be a popular body style among the 2T crowd. Whats your top speed??I bet it takes off hard!! I wish I could see/ride a built 2T in person , to see what a difference it is from a 4T. Might not be a good idea though...may make me want to sell my scoot and start over LOL

teddy554
03-24-2013, 09:08 AM
Actually the take off is real good on this scooter and motor and everything in the cvt is stock still, it as a lot of power on take off compared to my 70cc scoot and that has 2000 torque and clutch springs

skuttadawg
03-25-2013, 03:31 PM
5 grams was ok when my scoot was a 49cc but too light with a 70cc BBK

teddy554
03-25-2013, 04:17 PM
Did a little winter riding and actually had a mild crash no injuries just a broke brake lever
http://i1111.photobucket.com/albums/h479/teddyc554/20130325_130832.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20130325_131011.jpg
141

142

teddy554
04-11-2013, 01:18 AM
Just got my 54mm hoca kit in today wanted to post some pictures and will do a review later
http://i1111.photobucket.com/albums/h479/teddyc554/20130410_172916.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20130410_172857.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20130410_172950.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20130410_172942.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20130410_172923.jpg
http://i1111.photobucket.com/albums/h479/teddyc554/20130410_172930.jpg

Admin
04-11-2013, 03:58 AM
So nice and new. :D

Can't wait for the review! :tup:

teddy554
04-14-2013, 09:40 PM
My belt snap on my doing about 50mph and after i got stopped, i couldn't get the motor to stop running used kill switch and took keys out ran for like a minute at super high rpms but it still starts and runs. Some pictures of the belt or what was left http://i1111.photobucket.com/albums/h479/teddyc554/20130414_183555.jpg (http://s1111.photobucket.com/user/teddyc554/media/20130414_183555.jpg.html)
http://i1111.photobucket.com/albums/h479/teddyc554/20130414_183251.jpg (http://s1111.photobucket.com/user/teddyc554/media/20130414_183251.jpg.html)
http://i1111.photobucket.com/albums/h479/teddyc554/20130414_183300.jpg (http://s1111.photobucket.com/user/teddyc554/media/20130414_183300.jpg.html)

Frank Castle
03-05-2014, 09:01 PM
i like the pics with the graffitti backround and snow backround:tup: